Wotofo Recurve Dual RDA
Long time ago, “serious” specimens didn’t fall into my tentacles – everything, you see, we’re indulging in plushies. I remember that the forefather of today’s guest left me with a purely positive impression, therefore, with the hope of an even better effect (due to the “refinement” of the construct), I started dissecting.
Case material: stainless steel Atomizer
Height: 29mm with red drip type / 31mm with transparent drip type / 22mm without drip type
Connector: 510, pin gilded
Color: see photo Lower
– Recurve Dual RDA
– pre-wired spirals 2pcs
– optional 810th drip type
– Allen key
– coil trimming tool
– squonk pin
– spare origins
– spare screws
– spare glass
– user manual
Complete set, as usual, a bomb – besides everything you need to start , in the box and drip type there is an alternative, and a new tool for cutting the legs of the spiral. A great example to other manufacturers.
Appearance, as for me, is simple, but without excesses and “fits” in relation to the decor. This is a slightly fitted cylinder at the top with a single engraving of the model name. In general, a calm appearance, designed, perhaps, to the taste of most users.
There are two types of drip in the box, both of the 810th landing. The inner diameter differs by only 0.5mm. Both showed themselves in work pretty well. I liked the translucent (corporate), migrated here from the single-spiral version. He’s taller, and it’s more pleasant to hold in your mouth.
The inner processing of the dome is spherical. In the upper part it has a decent thickening of the metal, but this naturally does not save our guest from decent heating – the evaporation chamber for two spirals is still small. The dome sits on the base movably – this is how the airflow adjustment is achieved. However, stoppers for ease of unscrewing with the mod are present.
By the way, the adjustment works only in one direction, so consider this fact when positioning the spirals, if you are not using a fully open airflow. The course of adjusting the medium tightness, the origins are thin, however, the dome holds steady. But putting it on the drip can be problematic due to the special thickness of the base – sometimes it rises obliquely. Holes of the fence overlap in pairs in a vertical plane, however, you cannot leave only one pair open, because then the holes from the opposite edge treacherously open already outside the rack. The puff turned out to be free, but this is definitely not for lovers of completely free suction.
The deck should be familiar to all more or less orientated users in the vape industry, since this is a modified copy of the single-spiral namesake.
It is non-structural, designed for two spirals, the distance between the mounting holes is slightly more than 7.5 mm. The fixation of the spirals is correct. For the airflow, two racks on the sides are responsible – each with six holes. The profile is round – they seem to acquire a coil. And the main advantageous difference from its predecessor is that the angle is now a little steeper (direction to the bottom of the deck), therefore it turns out a little blowing from underneath.