Vapefly Jester Rebuildable POD System

We continue to have fun with PODs. Today my guest is a device that I have been waiting for a long time, but he was very late. And I was waiting for him only because a decent or, better to say, adequate serviced base is included with him. By the way, this is the second serial under with the “official” RBA base after pasito. Well, let’s see which one is better.

Vapefly Jester Rebuildable POD System

Dimensions: 91 x 35 x 19mm
Weight: 56g Case
material: aluminum + plastic
Power: built-in 870mAh
Cartridge capacity: 2.0ml
Evaporator resistance: 0.5 / 1.0Ω, RBA
Voltage range: 3.3 – 4.8V
Operating mode: POWER
Supported resistance: 0.5 – 3.0Ω
Protection: against low / high resistance, from overheating, from short circuit, from overcharging / overdischarge
Connector type: non-magnetic
Screen / diagonal: no
Micro-USB port / charging: yes, charging current 1.0A
Color: see photo below

Options
– Jester mod
– replaceable cartridge maintenance
-free- replaceable evaporator 0.5Ω (pre-installed)
– replaceable cartridge maintenance-free (pre-installed)- pre
-wound spirals 2pcs
– cotton
– wrench-screwdriver
– spare screws
– spare origins
– spare caps 4pcs
– USB cable
– user’s guide

The package bundle, as always with Vapefly, is chic. I never tire of repeating that the products of this brand are an example of how to do it. With all this abundance, they also manage to maintain a very humane price tag.

First impressions – neat, cute, comfortable, but somehow “not memorable”, not original or something. Indeed, the design of the average casual, but the intrusive decor is not observed. Better to be modest than catchy. Dimensions are not small, but the profile is quite compact, which positively affected ergonomics. By the way, quite light.

There are two cartridges in the kit – the first for replaceable evaporators, the second – serviced base. The latter is a couple of millimeters lower. They are fixed with latches on both sides. On the body of the mod, in turn, two buttons are visible for snapping. The tank keeps in fashion confidently. The capacity of both cartridges is the same – standard. The shape of the mouthpiece is flattened, but it didn’t seem particularly convenient to me – it’s a bit thick … By the way, it is problematic to monitor the fluid level – minus.

We start with non-service. The evaporator here is replaceable, moreover, these two types are offered, however, there will only be one in the kit – on the stack. It is refilled from above – just flip the lid and uncork the silicone plug. The filling hole is not the largest, but in principle it works quite normally, it is only occasionally clogged with a “liquid plug” when using especially thick nozzles. Airflow adjustment is present – a swivel ring with a stopper. The puff turned out to be medium in tightness, but do not have hopes that you can make it especially tight – even with completely closed blowing, a decent air intake. The taste on a replaceable coil is quite good, especially for the hearth. Nevertheless, the grid knows its business.

But, naturally, you are more interested in a completely different case – the service staff. Unlike the first instance, the top cover is removed completely, and its very poor oring fixes it, and even that one is set very low – it would be worth two. Here we have the first problem – on the walls under the lid will collect fluid. Moreover, after opening the lid, it can drain onto the mod (((Here I will give advice on how to minimize this matter – first put the lid on the removed cartridge and carefully press it to the bottom of the tank with your thumb and forefinger. After that, insert it until it clicks, but do not push further. If there is play after fixing, then the cover is not fully worn.

The filling hole here is of a similar size, there were no problems with it. There is a shallow hole on the deck to release excess air. It basically copes, but sometimes even through the cotton the slurry rises, if the latter is laid a little and pour intensively. There is another drawback – this cartridge is a little soldered with condensate. It seems that Vapefly has already made it a tradition))) The cons do not end there – this cartridge does not have an airflow adjustment, although it would seem that it is much more important and more necessary here. The puff here is more like MTL, but not particularly tight – you can hardly even try to drag directly into the lungs.

The base is cool – cigarette lovers will love it all the more. In total there are two racks for the correct fixation of one spiral, there are limiters on them, cuts for cutting legs too. Screws for a screwdriver behave normally. There is enough space left for the cotton wool, the ends will have to be left more authentic if you do not want to occasionally turn the device over. A small nozzle at the bottom of the deck is responsible for the lower airflow. The service is simple and even pleasant, as for me – there is no special attention. There is enough space between the racks – 5mm – there is enough space even for a modest fusik. By the way, the dome of the evaporation chamber is metallic, the internal processing is spherical. By the way, for burning, you do not need a third-party mod – everything can be done on the hell – profit!

Well, now in terms of taste. I believe that it is excellent – I admit, I did not expect that even on a complete monograft, the ingredients will be quite clearly distinguished. And the steam saturation is decent. In short, a very decent level – this will be better, for example, the same graze. Well, if you equip our hero with even the simplest klepton, I think he will even sparkle with all the colors.

The main body is rich in a fire button, which almost does not protrude outward. The move is very small, the click is clear, barely audible. A “miserable” LED indicator is built into it.

The built-in battery is of standard capacity, however, my measurements showed that we did not report the flies to us – almost 15% – a mess! It will charge a little less than an hour, the causal connector settled at the bottom of the device. It is possible to soar at this time. Moreover, the declared current is 0.9A, and in fact about 1A. It turns out that they did not report there, they shifted it here))) The
functionality of the set is very simple. Fortunately screwed the output voltage adjustment. In total, three modes are provided – 3.3 / 3.8 / 4.8V. The latter is believed, of course, with difficulty, but the mod fries on it especially violently. And yes, the difference between the modes is felt distinctly.

In general, the device’s work is quite normal – it starts off briskly, decently fries. Probably it consumes a charge normally – though, on a service staff, it flies away quickly enough, as, incidentally, is a manure. Most likely, you will have to “power” during daylight hours.

Impressions
It seems that I managed to do everything right for the “legal maintenance” of the hearths, but minor flaws spoil the big picture a bit. I will not say that they are directly critical, but in a compartment they add up to a not-so-pleasant picture. But still I liked this one under the idea and constructive. Yes, the appearance is ugly – but it works pretty well. And by taste, he is far ahead of many of his opponents.

I will recommend it, since at the disposal of this instance there are many significant advantages. In addition to the taste, I will single out a complete set, an adequate serviced base (moreover, served directly on the hearth), and a traditionally humane price tag.