Ultroner Victory – wooden original

Let’s slightly dilute our AIO weekdays with a really serious device. On the agenda, the original boxing mod from the Ultroner company – asmodus daughters. As you know, these guys do not represent the world of vaping without trimming it to stabwood, therefore, today’s guest also acquired a mantle of warm and pleasant to the touch piece of wood.

Ultroner Victory

Dimensions: 88 x 55 x 35mm
Weight: unknown
Case material: stainless steel + stabwood
Power: 1 x 18650
Chipset: Sevo-60
Output power: 5 – 60 W
Voltage range: up to 8.0 V
Operating mode: POWER, TC (NI200, SS, TI) (likely)
Temperature range:200 ℉ – 600 ℉ / 100 ℃ – 315 ℃
Supported resistance: 0.1 – 3.0Ω
Protection: against low / high resistance, against overheating, against short circuit, against reverse polarity, against overcharge / overdischarge
Connector type: steel 510, pin gold-plated, spring-loaded
Screen / diagonal: yes
Micro-USB port / charging: yes, unknown charging current
Color: see photo below

Options
– Victory mod
– USB cable
– user manual
– warranty card

Boxing mod looks quite interesting, but the design, as, indeed, is always with the manufacturer, not for everybody. The main finishing material is stabwood, and the shape of the case is specific. There is an anatomical notch in the back, then in the upper part it is a take-up, plus the base of the mode is much smaller in size than the upper part. Such an economy is difficult to assess by eye – you just have to feel it.

The developers offer only three color options, moreover, they differ only in the color of the trees.

The landing site has a “brutal” appearance, however, the maximum landing capabilities remained unknown.
Presumably its diameter will be 24mm.

The control panel, as always, is covered with a metal bar. The buttons are also made of metal, they are medium in size, they protrude decently from the case. The display is small, though it is not even known whether it is color or monochrome (I tend to the latter). At the very base, according to tradition, a connector for charging a battery with an unknown current settled.

Access to the battery compartment from the bottom – there you can see the screw cover with a relief key. And the container for the battery is made of stainless steel.

There are solid gaps in functionality – of course, there will be a varivatt limited to 60 watts, it will be quite possible to have thermal control. Probably, I did not find any detailed information regarding the new control chipset.